CentOS7命令行模式下安装Sybase ASE

安装过程如下:(此安装过程没有成功,记录过程,方便检查)

[root@jp-host ase160_linuxx86-64]# ./setup.bin 
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...

Launching installer...


Graphical installers are not supported by the VM. The console mode will be used instead...

===============================================================================
SAP Adaptive Server Enterprise                   (created with InstallAnywhere)
-------------------------------------------------------------------------------

Preparing CONSOLE Mode Installation...




===============================================================================
Introduction
------------

InstallAnywhere will guide you through the installation of SAP Adaptive Server 
Enterprise 16.0 GA PL01.

It is strongly recommended that you quit all programs before continuing with 
this installation.

Respond to each prompt to proceed to the next step in the installation.  If you
want to change something on a previous step, type 'back'.

You may cancel this installation at any time by typing 'quit'.

PRESS <ENTER> TO CONTINUE: 

===============================================================================
Choose Install Folder
---------------------

Where would you like to install?

  Default Install Folder: /opt/sap

ENTER AN ABSOLUTE PATH, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
      : 
The directory /opt/sap does not exist. Do you want to create it?
    (Y/N): y



===============================================================================
Choose Install Set
------------------

Please choose the Install Set to be installed by this installer.

  ->1- Typical
    2- Full

    3- Customize...

ENTER THE NUMBER FOR THE INSTALL SET, OR PRESS <ENTER> TO ACCEPT THE DEFAULT
   : 1



===============================================================================
Software License Type Selection
-------------------------------

What would you like to do?
 
  ->1- Install licensed copy of SAP Adaptive Server Enterprise

    2- Install Free Developer Edition of SAP Adaptive Server Enterprise

    3- Install Express Edition of SAP Adaptive Server Enterprise

    4- Evaluate SAP Adaptive Server Enterprise


Enter one of the options above: 3



===============================================================================
End-user License Agreement
--------------------------

1)  All regions

Please enter the number of the location you are installing. (1-1) (DEFAULT: 
   1): 


LICENSE AGREEMENT

SAP(r) ADAPTIVE SERVER(r) ENTERPRISE
EXPRESS EDITION
VERSION 16.0.x


NOTICE TO USER:   Scroll down and read this License 
Agreement (this "Agreement") carefully.  This is a legally 
binding Agreement between you (or your employer or company, 
as applicable) ("Licensee" or "You") and the SAP entity 
authorized to distribute the Program (as defined below) in 
the country in which you are located ("SAP").

By clicking "Accept" or "Agree," You agree to all of the 
terms and conditions stated in this Agreement.   If You do 
not agree to these terms, do not click "Accept" or "Agree." 
If You are entering into this Agreement on behalf of your 
employer or company, You represent and warrant that You have

Press ENTER to read the text [Type 'back' and press ENTER to skip the text] 
   : 
 
......

I agree to the terms of the SAP license for the install location specified. 
   (Y/N): y



===============================================================================
Pre-Installation Summary
------------------------

Please Review the Following Before Continuing:

Product Name:
    SAP Adaptive Server Enterprise

Install Folder:
    /opt/sap

Product Features:
    Adaptive Server Enterprise,
    Open Client,
    DB-Library,
    jConnect 16.0 for JDBC,
    Interactive SQL,
    QPTune,
    SySAM License Utilities,
    Remote Command and Control Agent for Adaptive Server,
    ASE ODBC Driver,
    ASE Extension Module for Python,
    ASE Database Driver for PERL,
    ASE Extension Module for PHP,
    SAP Control Center,
    Management User Interface for SAP Adaptive Server

Disk Space Information (for Installation Target): 
    Required:  2,353,406,077 Bytes
    Available: 49,843,564,544 Bytes

PRESS <ENTER> TO CONTINUE: 

===============================================================================
Ready To Install
----------------

InstallAnywhere is now ready to install SAP Adaptive Server Enterprise onto 
your system at the following location:

   /opt/sap

PRESS <ENTER> TO INSTALL: 

===============================================================================
Installing...
-------------

 [==================|==================|==================|==================]
 [------------------|------------------|------------------|------------------]



===============================================================================
Configure New Servers
---------------------

The SAP Adaptive Server Enterprise includes products that require 
configuration.  If you choose to configure the products on this screen, you 
will be given the option to specify custom values for each product.  If you 
choose not to configure the products now, you can configure them later.


Please deselect any products that you do not want to configure now :


        [X]  1  -  Configure new Adaptive Server
        [X]  2  -  Configure new Backup Server
        [X]  3  -  Configure new XP Server
        [X]  4  -  Configure new Job Scheduler
        [X]  5  -  Enable Self Management
        [X]  6  -  Configure SAP Control Center
To select an item enter its number, or 0 when you are finished: (DEFAULT: 0)
   : 



===============================================================================
Configure Servers with Different User Account
---------------------------------------------

 
Do you want to configure the server(s) under different user account?
 
    1- Yes
  ->2- No

Enter one of the options above: 



===============================================================================
User Configuration Data Directory
---------------------------------

Enter the directory where you want to store user data files such as interfaces 
file, RUN_<server> file, error log, etc.. The files for the server(s) you about
to create will be placed in this directory.

Data Directory (DEFAULT: /opt/sap): 




===============================================================================
Configure New Adaptive Server
-----------------------------

Adaptive Server Name (DEFAULT: JPHOST): 
System Administrator's Password: 
Confirm System Administrator's Password: 
Port Number (DEFAULT: 5000): 
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/JPHOST.log): 
Application Type
  ->1- Mixed (OLTP/DSS)
    2- Online Transaction Proccessing (OLTP)
    3- Decision Support Systems (DSS)

Select an application type: 1
Page Size
    1- 2k
  ->2- 4k
    3- 8k
    4- 16k

Select a page size: 1
  ->1- us_english

Default Language: 
    1- cp437 : Code Page 437, (United States) character set.
    2- cp850 : Code Page 850 (Multilingual) character set.
    3- iso15 : ISO_8859-15:1998, Latin9, Western Europe
  ->4- iso_1 : ISO 8859-1 (Latin-1) - Western European 8-bit character set.
    5- mac : Macintosh default character set for Western European locales.
    6- roman8 : Hewlett-Packard proprietary character set for European locales.
    7- roman9 : Hewlett-Packard proprietary character set for European locales.
    8- utf8 : Unicode 3.1 UTF-8 Character Set

Default Character Set: 8
  ->1- altdict : Alternate (lower-case first) dictionary ordering
    2- altnoacc : Alternate (lower-case first) accent-insensitive dictionary 
ordering
    3- altnocsp : Alternate (lower-case first) case-insensitive dictionary ordering
with order-by preference
    4- big5bin : Ordering that matches the binary ordering of the big5 character 
set
    5- bin_utf8 : Binary ordering, for the ISO 10646-1, UTF-8 multibyte encoding 
character set (utf8).
    6- binary : Binary ordering for UTF-16
    7- cp932bin : Ordering that matches the binary ordering of the cp932 character 
set
    8- cyrdict : Common cyrillic dictionary ordering
    9- cyrnocs : Common cyrillic case-insensitive dictionary ordering
   10- defaultml : Default Unicode multi-lingual ordering
   11- dict : General-purpose dictionary ordering
   12- dynix : Chinese phonetic ordering
   13- elldict : Greek dictionary ordering
   14- espdict : Spanish dictionary ordering
   15- espnoac : Spanish accent-insenitive dictionary ordering
   16- espnocs : Spanish case-insensitive dictionary ordering
   17- eucjisbn : Ordering that matches the binary ordering of the EUCJIS 
character set
   18- euckscbn : Ordering that matches the binary ordering of the EUCKSC 
character set
   19- gb2312bn : Ordering that matches the binary ordering of the gb2312 
character set
   20- gbpinyin : Chinese phonetic ordering
   21- gbpinyinnocs : Chinese phonetic ordering with no case preference
   22- hundict : Hungarian dictionary ordering
   23- hunnoac : Hungarian accent-insensitive dictionary ordering
   24- hunnocs : Hungarian case-insensitive dictionary ordering
   25- iso14651 : Ordering as per ISO14651 standard
   26- noaccent : General-purpose accent-insensitive dictionary ordering
   27- nocase : General-purpose case-insensitive dictionary ordering
   28- nocasep : General-purpose case-insensitive dictionary ordering with 
order-by preference
   29- rusdict : Russian dictionary ordering
   30- rusnocs : Russian case-insensitive dictionary ordering
   31- scandict : Scandinavian dictionary ordering
   32- scannocp : Scandinavian case-insensitive dictionary ordering with order-by 
preference
   33- sjisbin : Ordering that matches the binary ordering of the SJIS character 
set
   34- thaidict : Thai dictionary ordering
   35- turdict : Turkish dictionary ordering
   36- turknoac : Turkish accent-insensitive dictionary ordering
   37- turknocs : Turkish case-insensitive dictionary ordering
   38- utf8_nocase : Case insensitive ordering, for use with any utf8-based 8-bit 
environment.
   39- utf8bin : Ordering for UTF-16 that matches the binary ordering of UTF-8

Default Sort Order: 
Optimize ASE Configuration
  ->1- No
    2- Yes

Do you want to optimize ASE configuration?: 
Create sample databases
  ->1- No
    2- Yes

Do you want to create sample databases?: 2
Master Device (DEFAULT: /opt/sap/data/master.dat): 
Master Device Size (MB) (DEFAULT: 44): 
Master Database Size (MB) (DEFAULT: 18): 
System Procedure Device (DEFAULT: /opt/sap/data/sysprocs.dat): 
System Procedure Device Size (MB) (DEFAULT: 196): 
System Procedure Database Size (MB) (DEFAULT: 196): 
System Device (DEFAULT: /opt/sap/data/sybsysdb.dat): 
System Device Size (MB) (DEFAULT: 3): 
System Database Size (MB) (DEFAULT: 3): 
Tempdb Device (DEFAULT: /opt/sap/data/tempdbdev.dat): 
Tempdb Device Size (MB) (DEFAULT: 100): 
Tempdb Database Size (MB) (DEFAULT: 100): 
Enable PCI
  ->1- No
    2- Yes

Do you want to configure PCI/JAVA?: 

===============================================================================
Configure New Backup Server
---------------------------

Backup Server Name (DEFAULT: JPHOST_BS): 
Port Number (DEFAULT: 5001): 
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/JPHOST_BS.log): 
Allow Hosts (DEFAULT: ): 



===============================================================================
Configure New XP Server
-----------------------

Port Number (DEFAULT: 5002): 
Error Log (DEFAULT: /opt/sap/ASE-16_0/install/JPHOST_XP.log): 



===============================================================================
Configure New Job Scheduler
---------------------------

Job Scheduler Agent Name (DEFAULT: JPHOST_JSAGENT): 
Port Number (DEFAULT: 4900): 
Management Device (DEFAULT: /opt/sap/data/sybmgmtdb.dat): 
Management Device Size (MB) (DEFAULT: 76): 
Management Database Size (MB) (DEFAULT: 76): 



===============================================================================
Configure Self Management
-------------------------

Self Management User Name (DEFAULT: sa): 



===============================================================================
SAP Control Center - Configure Self Discovery Service Adaptor
-------------------------------------------------------------

Discovery Services provide client applications the ability to find Sybase 
resources within an enterprise environment without the need for local interface
file definitions.  SAP Control Center currently supports two discovery methods:
JINI and UDP.

JINI requires a dedicated JINI server to provide discovery services and can 
provide these services throughout the enterprise.  UDP does not require a 
dedicated server but is limited to discovery within the local subnet.
 
Do you want to configure UDP Adaptor? (Y/N): 
Do you want to configure UDP Adaptor? (Y/N): y
Do you want to configure JINI Adaptor? (Y/N): n



===============================================================================
SAP Control Center - Configure HTTP Ports
-----------------------------------------

SAP Control Center needs HTTP and HTTPS ports that do not conflict with ports 
used by other applications and services on this system. Accept the default 
ports or specify other, unused ports.

 
HTTP Port: [integer (1025-65535)] (DEFAULT: 8282): 
HTTPS Port: [integer (1025-65535)] (DEFAULT: 8283): 



===============================================================================
SAP Control Center - Configure RMI Port
---------------------------------------

The RMI service needs to use a port that is not used by other applications or 
services on this system. Accept the default port or specify an unused port.

 
RMI Port: [integer (1025-65535)] (DEFAULT: 9999): 



===============================================================================
SAP Control Center - Configure Administration Logins
----------------------------------------------------

Set the password for the SAP Control Center administrator.  You can also change
the administrator's login ID.
 
SCC administrator user (DEFAULT: sccadmin): 
SCC administrator password: 
Confirm SCC administrator password: 
SCC agent administrator user (DEFAULT: uafadmin): 
SCC agent administrator password: 
Confirm SCC agent administrator password: 



===============================================================================
SAP Control Center - Configure Repository Password
--------------------------------------------------

Set the SAP Control Center repository password.
 
SCC repository password: 
Confirm SCC repository password: 



===============================================================================
New Server Configuration Summary
--------------------------------

Adaptive Server
   Adaptive Server Name                JPHOST
   Port Number                         5000
   Application Type                    Mixed (OLTP/DSS)
   Create sample databases             true
   Page Size                           2k
   Error Log                           /opt/sap/ASE-16_0/install/JPHOST.log
   Master Device                       /opt/sap/data/master.dat
   Master Device Size (MB)             44
   Master Database Size (MB)           18
   System Procedure Device             /opt/sap/data/sysprocs.dat
   System Procedure Device Size (MB)   196
   System Procedure Database Size (MB) 196
   System Device                       /opt/sap/data/sybsysdb.dat
   System Device Size (MB)             3
   System Database Size (MB)           3
   Tempdb Device                       /opt/sap/data/tempdbdev.dat
   Tempdb Device Size (MB)             100
   Tempdb Database Size (MB)           100
   Default Language                    us_english
   Default Character Set               utf8
   Default Sort Order                  altdict
Backup Server
   Backup Server Name                  JPHOST_BS
   Port Number                         5001
   Error Log                           /opt/sap/ASE-16_0/install/JPHOST_BS.log
XP Server
   XP Server Name                      JPHOST_XP
   Port Number                         5002
   Error Log                           /opt/sap/ASE-16_0/install/JPHOST_XP.log
Job Scheduler
   Job Scheduler Agent Name            JPHOST_JSAGENT
   Port Number                         4900
   Management Device                   /opt/sap/data/sybmgmtdb.dat
   Management Device Size (MB)         76
   Management Database Size (MB)       76
Self Management
   Self Management User Name           sa 
   Self Management User Password       ******
SAP Control Center - Configure Self Discovery Service Adaptor
   adaptor                             UDP
SAP Control Center - Configure HTTP Ports
   SCC HTTP Port                       8282
   SCC HTTPS Port                      8283
SAP Control Center - Configure RMI Port
   RMI Port                            9999
SAP Control Center - Configure Administration Logins
   SCC administrator user              sccadmin
   SCC administrator password          ******
   SCC agent administrator user        uafadmin
   SCC agent administrator password    ******
SAP Control Center - Configure Repository Password
   SCC repository password             ********
Do you want to continue? (DEFAULT: yes): 



===============================================================================
Configure New Adaptive Server
-----------------------------

Building SAP Adaptive Server Enterprise 'JPHOST':
Writing entry into directory services...
Directory services entry complete.
Building master device...
Master device complete.
Writing RUN_JPHOST file...
RUN_JPHOST file complete.
Starting server...
Server started.
Set SA password...
SA password is set.
Building sysprocs device and sybsystemprocs database...
sysprocs device and sybsystemprocs database created.
Running installmaster script to install system stored procedures...
installmaster: 10% complete.
installmaster: 20% complete.
installmaster: 30% complete.
installmaster: 40% complete.
installmaster: 50% complete.
installmaster: 60% complete.
installmaster: 70% complete.
installmaster: 80% complete.
installmaster: 90% complete.
installmaster: 100% complete.
installmaster script complete.
Creating two-phase commit database...
Two phase commit database complete.
Extending tempdb database ...
Extending tempdb database complete.
Installing common character sets (Code Page 437, Code Page 850, ISO Latin-1,
Macintosh and HP Roman-8)...
Character sets installed.
Setting server name in SAP Adaptive Server Enterprise...
Server name added.
Setting optimization goal...
Setting optimization goal complete.
Server 'JPHOST' was successfully created.



===============================================================================
Set Adaptive Server Default Language
------------------------------------

Installing character set 'UTF-8' in the SAP Adaptive Server Enterprise...
Character set 'UTF-8' was successfully installed in the SAP Adaptive Server
Enterprise.
Installing character set 'ISO_8859-15:1998' in the SAP Adaptive Server
Enterprise...
Character set 'ISO_8859-15:1998' was successfully installed in the SAP Adaptive

Server Enterprise.
Installing character set 'roman9' in the SAP Adaptive Server Enterprise...
Character set 'roman9' was successfully installed in the SAP Adaptive Server
Enterprise.
Making 'UTF-8' the SAP Adaptive Server Enterprise's default character set...
Making 'Alternate (lower-case first) dictionary ordering' the SAP Adaptive
Server Enterprise's default sort order...
The SAP Adaptive Server Enterprise's default character set is now 'UTF-8'.
The SAP Adaptive Server Enterprise's default sort order is now 'Alternate
(lower-case first) dictionary ordering'.
Done



===============================================================================
Create sample databases
-----------------------

CT-LIBRARY error:
        ct_connect(): network packet layer: internal net library error: Protocol 
driver call to parse connection information failed

Failed to Create sample databases

PRESS <ENTER> TO CONTINUE: 



===============================================================================
Create sample databases
-----------------------

CT-LIBRARY error:
        ct_connect(): network packet layer: internal net library error: Protocol 
driver call to parse connection information failed

Failed to Create sample databases

PRESS <ENTER> TO CONTINUE: 



===============================================================================
Configure New Backup Server
---------------------------

Building Backup Server 'JPHOST_BS':
Writing entry into directory services...
Directory services entry complete.
Writing RUN_JPHOST_BS file...
RUN_JPHOST_BS file complete.
Starting server...
Server started.
Server 'JPHOST_BS' was successfully created.



===============================================================================
Configure New XP Server
-----------------------

Building XP Server 'JPHOST_XP':
Writing entry into directory services...
Directory services entry complete.
Setting server name in SAP Adaptive Server Enterprise...
Server name added.
Server 'JPHOST_XP' was successfully created.
'JPHOST_XP' will be started when needed by the SAP Adaptive Server Enterprise.



===============================================================================
Configure New Job Scheduler
---------------------------

Building Job Scheduler 'JPHOST_JSAGENT':
Writing entry into directory services...
Directory services entry complete.
Installing required script(s) in related SAP Adaptive Server Enterprise...
installjsdb: 10% complete.
installjsdb: 20% complete.
installjsdb: 30% complete.
installjsdb: 40% complete.
installjsdb: 50% complete.
installjsdb: 60% complete.
installjsdb: 70% complete.
installjsdb: 80% complete.
installjsdb: 90% complete.
installjsdb: 100% complete.
jst_get_object_quoted_name: 10% complete.
jst_get_object_quoted_name: 20% complete.
jst_get_object_quoted_name: 30% complete.
jst_get_object_quoted_name: 100% complete.
jst_check_reorg_space: 10% complete.
jst_check_reorg_space: 20% complete.
jst_check_reorg_space: 30% complete.
jst_check_reorg_space: 100% complete.
jst_database_names: 10% complete.
jst_database_names: 20% complete.
jst_database_names: 30% complete.
jst_database_names: 100% complete.
jst_get_index_names: 10% complete.
jst_get_index_names: 20% complete.
jst_get_index_names: 30% complete.
jst_get_index_names: 100% complete.
jst_get_datachange: 10% complete.
jst_get_datachange: 20% complete.
jst_get_datachange: 100% complete.
jst_get_datestr: 10% complete.
jst_get_datestr: 20% complete.
jst_get_datestr: 30% complete.
jst_get_datestr: 100% complete.
jst_get_freespace: 10% complete.
jst_get_freespace: 20% complete.
jst_get_freespace: 100% complete.
jst_get_mdcache_type_config: 10% complete.
jst_get_mdcache_type_config: 20% complete.
jst_get_mdcache_type_config: 30% complete.
jst_get_mdcache_type_config: 40% complete.
jst_get_mdcache_type_config: 100% complete.
jst_get_usedspace: 10% complete.
jst_get_usedspace: 20% complete.
jst_get_usedspace: 100% complete.
jst_reconf_mdcache_type: 10% complete.
jst_reconf_mdcache_type: 20% complete.
jst_reconf_mdcache_type: 30% complete.
jst_reconf_mdcache_type: 100% complete.
jst_version_num: 10% complete.
jst_version_num: 20% complete.
jst_version_num: 30% complete.
jst_version_num: 100% complete.
jst_valid_ase_version: 10% complete.
jst_valid_ase_version: 20% complete.
jst_valid_ase_version: 30% complete.
jst_valid_ase_version: 40% complete.
jst_valid_ase_version: 50% complete.
jst_valid_ase_version: 100% complete.
jst_delete_statistics: 10% complete.
jst_delete_statistics: 20% complete.
jst_delete_statistics: 30% complete.
jst_delete_statistics: 100% complete.
jst_dump_databases: 10% complete.
jst_dump_databases: 20% complete.
jst_dump_databases: 30% complete.
jst_dump_databases: 40% complete.
jst_dump_databases: 50% complete.
jst_dump_databases: 60% complete.
jst_dump_databases: 100% complete.
jst_dump_logs: 10% complete.
jst_dump_logs: 20% complete.
jst_dump_logs: 30% complete.
jst_dump_logs: 40% complete.
jst_dump_logs: 50% complete.
jst_dump_logs: 60% complete.
jst_dump_logs: 70% complete.
jst_dump_logs: 100% complete.
jst_reclaim_index_space: 10% complete.
jst_reclaim_index_space: 20% complete.
jst_reclaim_index_space: 30% complete.
jst_reclaim_index_space: 100% complete.
jst_reclaim_table_space: 10% complete.
jst_reclaim_table_space: 20% complete.
jst_reclaim_table_space: 30% complete.
jst_reclaim_table_space: 100% complete.
jst_reconf_locks: 10% complete.
jst_reconf_locks: 20% complete.
jst_reconf_locks: 100% complete.
jst_reconf_mdcache: 10% complete.
jst_reconf_mdcache: 20% complete.
jst_reconf_mdcache: 100% complete.
jst_reconf_usr_conns: 10% complete.
jst_reconf_usr_conns: 20% complete.
jst_reconf_usr_conns: 30% complete.
jst_reconf_usr_conns: 100% complete.
jst_reorg_rebuild_indexes: 10% complete.
jst_reorg_rebuild_indexes: 20% complete.
jst_reorg_rebuild_indexes: 100% complete.
jst_reorg_rebuild_tables: 10% complete.
jst_reorg_rebuild_tables: 20% complete.
jst_reorg_rebuild_tables: 30% complete.
jst_reorg_rebuild_tables: 100% complete.
jst_update_statistics: 10% complete.
jst_update_statistics: 20% complete.
jst_update_statistics: 30% complete.
jst_update_statistics: 40% complete.
jst_update_statistics: 100% complete.
jst_svr_update_statistics: 10% complete.
jst_svr_update_statistics: 20% complete.
jst_svr_update_statistics: 30% complete.
jst_svr_update_statistics: 40% complete.
jst_svr_update_statistics: 50% complete.
jst_svr_update_statistics: 100% complete.
Installing SybBackupDbToDiskTemplate.xml in the SAP Adaptive Server
Enterprise...
Task failed

----------------------------------------------------------------
W E L C O M E   T O

TemplateImport Utility [version 1.11]    Oct 23, 2015 11:19:42 AM

Runtime Switches:

TemplateImport Properties:

Server_Machine_Name: jp-host
Server_Name: JPHOST
Server_Port: 5000
Template_Description_Override: Dumps specified database(s).
Template_Group_Path_Override: Backups
Template_Language: en
Template_Name_Override: Backup Database to Disk Template
Template_Version_Override: 3.1
                 Template_XML_File: 
/opt/sap/ASE-16_0/jobscheduler/Templates/xml/en/SybBackupDbToDiskTemplate.xml
----------------------------------------------------------------
Reading XML File: 
/opt/sap/ASE-16_0/jobscheduler/Templates/xml/en/SybBackupDbToDiskTemplate.xml
XML File Read Completed Successfully
Creating Initial Template Record
SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection 
refused
SQLException during getConnection: java.sql.SQLException: JZ006: Caught 
IOException: java.net.ConnectException: Connection refused
Exception  : SQLException when trying to connect
SQLException: java.sql.SQLException: JZ006: Caught IOException: 
java.net.ConnectException: Connection refused
Exception in thread "main" java.lang.NullPointerException: while trying to 
invoke the method 
com.sybase.util.template.Connection.execUpdate(java.lang.String) of a null 
object loaded from field com.sybase.util.template.TemplateBase._conn of an 
object loaded from local variable 'this'
at com.sybase.util.template.TemplateBase.execUpdate(TemplateBase.java:3296)
        at 
com.sybase.util.template.TemplateBase.createTemplate(TemplateBase.java:2311)
        at 
com.sybase.util.template.TemplateImport.importTemplate(TemplateImport.java:436)
        at 
com.sybase.util.template.TemplateImport.mainRoutine(TemplateImport.java:360)
at com.sybase.util.template.TemplateImport.main(TemplateImport.java:348)
Server 'JPHOST_JSAGENT' was not created.

Failed to Configure New Job Scheduler

PRESS <ENTER> TO CONTINUE: 



===============================================================================
Installation Completed
----------------------

The product configuration failed.

Please check the product configuration log files in 
"/opt/sap/ASE-16_0/init/logs" and consult Sybase Customer Service & Support at 
http://www.sybase.com/support.

If you have not done so, please go to https://sybase.subscribenet.com to obtain
the Sybase software licenses.


 
PRESS <ENTER> TO EXIT THE INSTALLER: 
[root@jp-host ase160_linuxx86-64]# 

配置环境变量:cat SYBASE.sh >> ~/.bash_profile

登陆: isql -H localhost -U sa -P jipeng -S JPHOST

问题汇总:

enlightened启动时出现一下错误
/opt/sap/ASE-16_0/bin/dataserver: error while loading shared libraries: libsybcsi_core29.so: cannot open shared object file: No such file or directory